652118 THERMOMETER SIKA 174B 110X30MM, PT1/2 0-160DEG.C 63MM-STEM

652118 THERMOMETER SIKA 174B 110X30MM, PT1/2 0-160DEG.C 63MM-STEM
规格参数 参数值
IMPA编码 652118
产品单位 PCE
产品规格 A wide variety of Sika thermometers are available. The most widely carried, standard types are listed below with their respective specifications. The thermometer casings are finished in anodized gold colour. Standard models have the graduated readings listed on the right hand side and the surface is coated for protection from outside elements. Straight Thermometers Type 271B, 291B, 174B: Threaded sockets with a solid hexagonal nut. Adjustable to any desired viewing position and locked by brass nut, spanner size 22 mm. Thermometers with a measuring range from -60oC to +250oC have a blue fluid indicator and thermometers with ranges above 250oC work with mercury indicators. Immersion Tubes, pockets Standard: brass for temperatures up to 250oC, for temperatures above 250oC steel. When ordering, specify thread size as well as type, range and immersion stem length, or SIKA's catalogue number. As to thread sizes of the socket the most common PT (R) 1/2" is applied to the following coded items.
中文汉化 652118 施可耐热电偶温度计 174B，110x30mm，PT1/2，0-160°C，63mm-柄 这里提供多种施可耐的温度计选择。我们主要销售的标准型号及其规格如下。温度计壳体采用阳极氧化金涂层。 标准型号在右侧标有刻度读数，并且表面涂覆以保护免受外部环境影响。 直型温度计：类型271B、291B、174B： 带有实心六角螺母的螺纹插头。 可根据需要调整至任何观察角度，并通过黄铜螺帽锁定，适用22mm扳手。 测量范围为-60°C至+250°C的温度计使用蓝色液体指示器，而测量范围超过250°C的温度计则采用汞指示器。 浸入式管/套筒： 标准配置：250°C以下使用黄铜，250°C以上使用钢材质。 下单时，请同时注明螺纹尺寸、类型、测量范围和浸入杆长度，或直接参考施可耐的产品目录号。 对于插头的螺纹尺寸，最常见的PT（R）1/2
物料版本

以上内容为自动翻译的内容，仅供参考

This content is automatically translated and is for reference only.