510773 BRUSH WIRE WHEEL STANDARD, 125MMX1/2"

510773 BRUSH WIRE WHEEL STANDARD, 125MMX1/2
规格参数 参数值
IMPA编码 510773
产品单位 PCE
产品规格 Designed for high speed operation on pneumatic or electric scaling and sanding machines. These brushes remove rust and scale from metal, clean tanks and boat hulls, take off old paint, and clean castings and structural metal. Threaded nut type and welded shaft types are available. When ordering, please specify the type of fitting required on the cup brush and the inner diameter of the bolt fitting. – Caution – Whenever ordering wire brushes, be certain that they will not be used on machines with speeds higher than the maximum safety speed shown for the brush.
中文汉化 510773 标准刷丝轮，125mmx1/2“ 专为在气动或电动除锈和抛光机上高速操作设计。 这些刷子能从金属上去除锈迹和鳞片，清洁油箱和船体，去除旧漆，并清理铸件和结构钢。 提供有螺纹帽类型和焊接轴类型。 订单时，请指定杯刷所需的安装类型以及螺栓安装的内径。 - 警告 - 下单时，请确保刷丝轮不会用于超过刷子所示最大安全速度的机器上。
物料版本

以上内容为自动翻译的内容，仅供参考

This content is automatically translated and is for reference only.